Holds 6 x 1.5 mL or 2.0 mL microfuge tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 6.0 x 4.3 x 3.8 cm / 2.4 x 1.7 x 1.5 in
CoolRack M6 is available in 3 colors
BCS-163, grey
BCS-164, green,
BCS-165, orange
Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Holds 15 x 1.5 mL or 2.0 mL microfuge tubes
Made in USA.
Dimensions (L x W x H): 10.2 x 6.4 x 3.8 cm / 4.0 x 2.5 x 1.5 in
SBS-footprint. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Holds one 96-well PCR plate, strip-wells or 200 uL tubes. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Use ice-free in CoolBox XT workstations. Made in USA.
Center of A1 well: .63 inch from left and .50 inch from top
Dimensions (L x W x H): 12.7 x 8.6 x 2.5 cm / 5.0 x 3.4 x 1.0 in
Holds one universal 55ml reagent reservoir (such as Labcor, VWRbrand, and others). CoolSink LX55 is a thermo-conductive reagent reservoir holder for universal 55ml reagent reservoirs. The snug fit between the reservoir and the CoolSink LX55 keeps the liquid contents uniformly cold or warm when the CoolSink is placed in direct contact with a temperature source, such as ice, cold plate, hot plate or water bath. Made in USA.
Dimensions (L x W x H): 14.6 x 6.4 x 3.5 cm / 5.7 x 2.5 x 1.4 in
Lightweight, insulated CoolRack LV modules provide cooling for up to 12 13mm or 16mm diameter blood tubes. The thermo-conductive alloy base and tube wells ensure uniform, consistent and reproducible cooling for all samples. The outer shell is constructed of a durable, highly insulative closed-cell polyethylene foam that allows minimal heat influx while providing a comfortable grip.
The external shell stays firmly attached to the base and tube wells through a magnetic connection at the base seam. To clean, detach the external shell from the base frame. The base frame is autoclavable or can be cleaned with alcohol, 10% bleach solution and most common laboratory detergents and cleaning agents. The outer shell can be cleaned with alcohol, 10% bleach solution, and most common laboratory detergents and cleaning agents.
Cooling on ice
Place CoolRack LV module directly on ice in an ice bucket. The CoolRack LV module will adapt to
Ice-free cooling
For short-term cooling (approximately three hours): Use CoolRack LV module in a CoolBox MP ice-free cooling system. (NOTE: the CoolRack LV module is tall and will not allow the CoolBox MP lid to close. However, the CoolRack LV module is insulated, thus providing similar performance to a closed CoolBox MP. If lid closure is important, please see CoolBox XT below.)
For long-term cooling (approximately 10 hours): Use CoolRack LV in a CoolBox XT or CoolBox 2XT ice-free workstation. Because the CoolRack LV module has an insulative outer shell, it is not necessary to close the lid of the CoolBox XT to achieve maximum cooling duration. However, if lid closure is important to your application, please order a CoolBox XT Extension Collar to extend the height of the CoolBox XT workstation and allow the lid to close.Made in USA.
Dimensions (L x W x H): 13.7 x 9.4 x 9.7 cm / 5.4 x 3.7 x 3.8 in
Lightweight, insulated module provide cooling for up to 12 x 15 mL centrifuge tubes. The thermo-conductive alloy base and tube wells ensure uniform, consistent and reproducible cooling for all samples. The outer shell is constructed of a durable, highly insulative closed-cell polyethylene foam that allows minimal heat influx while providing a comfortable grip.
The external shell stays firmly attached to the base and tube wells through a magnetic connection at the base seam. To clean, detach the external shell from the base frame. The base frame is autoclavable or can be cleaned with alcohol, 10% bleach solution and most common laboratory detergents and cleaning agents. The outer shell can be cleaned with alcohol, 10% bleach solution, and most common laboratory detergents and cleaning agents.
Cooling on ice
Place CoolRack L module directly on ice in an ice bucket. The CoolRack L module will adapt to
Ice-free cooling
For short-term cooling (approximately three hours): Use CoolRack L module in a CoolBox MP ice-free cooling system. (NOTE: the CoolRack L module is tall and will not allow the CoolBox MP lid to close. However, the CoolRack L module is insulated, thus providing similar performance to a closed CoolBox MP. If lid closure is important, please see CoolBox XT below.)
For long-term cooling (approximately 10 hours): Use CoolRack L in a CoolBox XT or CoolBox 2XT ice-free workstation. Because the CoolRack L module has an insulative outer shell, it is not necessary to close the lid of the CoolBox XT to achieve maximum cooling duration. However, if lid closure is important to your application, please order a CoolBox XT Extension Collar to extend the height of the CoolBox XT workstation and allow the lid to close.
Made in USA. Dimensions (L x W x H): 13.7 x 9.4 x 11.9 cm / 5.4 x 3.7 x 4.7 in
SBS-footprint. Holds one 96-well u-bottom plate.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Precision-engineered "direct contact" stage design virtually eliminates the insulating air gap typically found between the bottom of the plate wells and the temperature source, ensuring well-to-well temperature consistency and no "edge effect."
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Ideal for Bradford protein assays or other colorimetric or fluorescent microplate assays.
Use ice-free in CoolBox XT workstations.
Made in USA.
Dimensions (L x W x H): 12.8 x 8.6 x 1.7 cm / 5.0 x 3.4 x 0.7 in
Holds up to 12 x 5 mL centrifuge tubes
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Use ice-free in CoolBox XT workstations.
Made in USA.
Dimensions (L x W x H): 12.7 x 8.6 x 5.0 cm / 5.0 x 3.4 x 2.0 in
SBS-footprint. Holds one 6-,12-, 24-, 48-, 96-, or 384-well flat-bottom plate.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Precision-engineered "direct contact" stage design virtually eliminates the insulating air gap typically found between the bottom of the plate wells and the temperature source, ensuring well-to-well temperature consistency and no "edge effect."
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Ideal for all benchtop procedures requiring cooling, freezing or thawing such as enzyme reactions, glycerol stocks, FACS staining and analysis in the same plate, RNA and protein isolation, "Dilution" assays.
Use ice-free in CoolBox XT workstations. Made in USA.
Dimensions (L x W x H): 12.8 x 8.6 x 1.7 cm / 5.0 x 3.4 x 0.7 in
Holds 6 x 1.5 mL or 2.0 mL microfuge tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 6.0 x 4.3 x 3.8 cm / 2.4 x 1.7 x 1.5 in
CoolRack M6 is available in 3 colors
BCS-163, grey
BCS-164, green,
BCS-165, orange
Holds 6 x 1.5 mL or 2.0 mL microfuge tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 6.0 x 4.3 x 3.8 cm / 2.4 x 1.7 x 1.5 in
CoolRack M6 is available in 3 colors
BCS-163, grey
BCS-164, green,
BCS-165, orange
9-well thermo-conductive module for 16x100mm blood tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 8.9 x 8.9 x 8.4 cm / 3.5 x 3.5 x 3.3 in
9-well thermo-conductive module for 13x75mm blood tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 8.9 x 8.9 x 6.1 cm / 3.5 x 3.5 x 2.4 in
Holds up to 4 x 50 mL centrifuge tubes
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Use ice-free in CoolBox XT workstations.
Made in USA.
Dimensions (L x W x H): 8.9 x 8.9 x 10.7 cm / 3.5 x 3.5 x 4.2 in
Holds 15 x 1.5 mL or 2.0 mL microfuge tubes.Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Dimensions: 4 x 2.5 x 1.5 in. (L x W x H) / 10.2 x 6.4 x 3.8 cm. (L x W x H)
CoolRack M15 is available in 3 colors
BCS-125, grey
BCS-125G, green
BCS-125O, orange
Made in USA.
Holds 9 13x100mm blood tubes or 5ml cryogenic vials. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 8.9 x 8.9 x 8.4 cm / 3.5 x 3.5 x 3.3 in
Holds 30 x 500 uL microfuge tubes.Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
Holds 30 x 1.5 mL or 2.0 mL microfuge tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
Holds 15 x 1.5 mL or 2.0 mL microfuge tubes.Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Dimensions: 4 x 2.5 x 1.5 in. (L x W x H) / 10.2 x 6.4 x 3.8 cm. (L x W x H)
CoolRack M15 is available in 3 colors
BCS-125, grey
BCS-125G, green
BCS-125O, orange
Made in USA.
Holds 15 standard 12.5mm diameter cryogenic vials or 12 x 75 mm FACS tubes. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Made in USA.
Dimensions (L x W x H): 10.2 x 6.4 x 3.8 cm / 4.0 x 2.5 x 1.5 in
Holds 15 x 1.5 mL or 2.0 mL microfuge tubes.Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Dimensions: 4 x 2.5 x 1.5 in. (L x W x H) / 10.2 x 6.4 x 3.8 cm. (L x W x H)
CoolRack M15 is available in 3 colors
BCS-125, grey
BCS-125G, green
BCS-125O, orange
Made in USA.
Holds 96 x 1.5 mL or 2.0 mL microfuge tubes, A-H and 1-12 row and column indexing. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Well spacing accommodates adjustable-head multi-channel pipetters at widest setting.Made in USA.
Dimensions (L x W x H): 25.4 x 15.2 x 3.8 cm / 10.0 x 6.0 x 1.5 in
Holds up to 9 x 15 mL centrifuge tubes. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Use ice-free in CoolBox XT workstations. Made in USA.
Dimensions (L x W x H): 13.7 x 9.4 x 11.9 cm / 5.4 x 3.7 x 4.7 in
Holds 30 x 1.5 mL or 2.0 mL microfuge tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.Made in USA.
CoolRack M30 is available in 3 colors
BCS-108, grey
BCS-108G, green
BCS-108O, orange
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
Holds 45 standard 12.5mm diameter cryogenic vials or 12 x 75 mm FACS tubes. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Made in USA.
Dimensions (L x W x H): 17.3 x 9.7 x 3.8 cm / 6.8 x 3.8 x 1.5 in
Holds 90 x 1.5 mL or 2.0 mL microfuge tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions: (L x W x H): 26.8 x 11.2 x 3.8 cm / 10.6 x 4.4 x 1.5 in
粤公网安备 44010602000434号
